Fuel Injector Cleaning Service Fuel Injector And Cleaner Cleaning
Machine For Sale
Introduction
As one of the key components of the EFI(electyonic fuel injection)
engine, its operation will seriously affect the performance of the
engine. The value of the injector is considered to be expensive,
and most people will not easily replace it. However, due to the
influence of driving habits, driving environment, etc., the
injector is extremely prone to carbon deposits and is blocked. If
it is not detected and maintained from time to time, it will
shorten the life. So all of them will increase the number of
maintenance of the injector. Therefore, it is essential to clean
and inspect the injector.
Parameters
| Voltage | AC220V+10%50Hz/60z |
| Host power | 230W |
| Ultrasonic cleaning power | 100W |
| Dimensions | 400*410*580mm |
| Timing range | 1-9999s |
| Pulse width range | 0. 5-25ms Step 0.1ms |
| Machine weight | 27kg |
| Relative humidity | <85% |
| Analog detection speed range | 10-9990rpm step 10pm
|
Function
1. Positive cleaning function: 4 or 6 nozzles can be cleaned in the
forward direction at the same time.
2. Reverse cleaning function: Reverse cleaning of 4 or 6 injectors
at the same time.
3. Ultrasonic cleaning function: powerful ultrasonic cleaning
technology can completely remove the carbon deposit on the
injector.
4. Atomization test function: Use the backlight to thoroughly
observe the spray atomization of the injector.
5. Uniformity test function: Detect the uniformity of the fuel
injection amount of each injector.
Why should do fuel injector cleaning for engines?
Poor fuel can cause the injector to work poorly, causing serious
carbon accumulation in the cylinder, accelerating wear of the
cylinder and piston ring, resulting in unstable idle speed,
increased fuel consumption, accelerated acceleration, difficulty in
starting and excessive discharge; severely blocked spray. The
nozzle is damaged and the engine is damaged.
